$2000 Sign-On Bonus

Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI’s as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management.

Two Shifts Available: Tuesday-Saturday or Sunday-Thursday 7:00am-3:30pm or 8:00am-5:00pm

Job Responsibilities:

Experienced quality individual in dimensional inspection of aerospace machined components
Experience in performing FAI’s – AS9102
Experience with hand measurement tools
Knowledge of CMM Inspection process
Knowledge and experience in GD&T (ASME Y14.5)
Knowledge and experience with blueprint interpretation
Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation
Process warehouse materials
Rely on instructions and pre-established guidelines/procedures to perform the functions of the job
Support positive corrective actions and identification of root cause
Other duties as assigned.

Required Skills

Experienced quality individual in dimensional inspection of aerospace machined components
Experience in performing FAI’s – AS9102
Experience with hand measurement tools
MS Outlook, and EXCEL experience
Experience with hand measurement gages, conduct conventional inspection to engineering requirements
Knowledge and experience in GD&T (ASME Y14.5)
Knowledge and experience with blueprint interpretation
Valid drivers license and auto insurance required.

Additional Desired Skills:

Prior practical experience and implementation of Quality inspection tools and equipment.
Experience in RCCA, and problem solving

General Requirements

Ability to handle complex situations and solve complex problems
Ability to work effectively under pressure to meet deadlines
Ability to press and analyze technical and business information
Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers
Ability to remain seated for up to 5 hours at a time
Fluent English – reading and writing is required
Professionalism, integrity, and exceptional attention to detail
Strong independent decision-making skills; excellent analytical skills and professional judgment
Excellent interpersonal, written, and verbal communication skills
Must be able to simultaneously manage several objectives
Must be detail oriented, organized, and self-motivated

Additional Qualifications (Preferred):

3+ years’ experience as a quality inspector or technician.
3+ years’ experience in an aerospace manufacturing facility
3+ years’ experience in inspection duties, FAI’s GD&T, and b/p interpretation
Proficient with Microsoft Office products
Effective communication skills
Detail oriented
Any combination of education and experience may be considered

Vision Exam Requirements: The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply.

4.15.2 Visual Acuity Operators and inspectors involved with electronics manufacturing are to be tested annually by a medical professional and must meet one of the following near vision standards.

Color vision requirements: Operators and inspectors must be able to distinguish and differentiate between red, green, blue, and yellow at a minimum as prescribed in Dvorine Charts, Ishihara Plates, or AO – HRR Tests.

Tumbling E in accordance with ISO 18490
20/25 (Snellen) at 16 inches (40.64cm), +/- 1 inch (2.54cm)*
Jaeger No 1 at not less than 12 inches (30.48cm)*
* With at least one eye, either natural or corrected
Valid Driver’s License
Valid Auto Insurance

WORKING CONDITIONS
Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction.
Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time.
Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others.
Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers.
Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime.
The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high.

BENEFITS:

12 days paid vacation first year, increasing with service years
10 days paid sick time
11 paid holidays
Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents
Champ Plan Wellness and Health
Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings
Participation increases net take home pay $$$ in most instances
Free wellness initiatives
Free tele-health
Free and discounted RX
Auto enrollment (unless tax elections result in negative impact)
Eligible on the 1st of the month following 30 days of continuous employment
Requires monthly 10-minute wellness activity participation
401k retirement savings with match
Eligible on the first (1st) of the month following 90 days of continuous employment
100% match of 1st 3% contribution
50% match of next 2% contribution
IMMEDIATE VESTING
Company-provided cell phone, laptop, mobile wi-fi (for business use only)
Regular Hourly rate for travel time
Direct Pay Travel arrangements for flights, hotels and rental cars
Travel Reimbursements direct deposited with each payroll
Federal rate Mileage reimbursement when driving personal vehicles on company business
Per diem reimbursements for meals and incidentals
$1500 EMPLOYEE REFERRAL BONUS
Initial $750 paid upon hire of qualified referred employee (rehires excluded)
Additional $750 paid upon referral’s full completion of 90 days’ employment

Pay Range

$25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer.

Company Overview

TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results.

TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors.

Job Type: Full-time

Pay: $25.00 - $40.00 per hour

Benefits:

401(k)
401(k) matching
Dental insurance
Health insurance
Life insurance
Paid time off
Referral program
Vision insurance

Application Question(s):

Have you performed final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection)
Can you please explain your experience with completing FAI Forms 1-3?

Have you been the person who fills out and submits forms 1,2,3

Have you ever reviewed and approved FAI reports prior to submittal?

Have you ever had to work with an OEM to make revisions and corrections to a submitted FAI?

Have you been responsible for compiling the required documentation needed for FAI submittal?

Experience:

aerospace: 3 years (Preferred)
hand measurement tools: 3 years (Preferred)
blueprint interpretation: 3 years (Preferred)
performing FAI’s – AS9102: 3 years (Required)

Work Location: In person

Trigo ADR Americas

Latest Jobs

Aerospace Quality Inspector